Curvature investigation in tapered fibers and its application to sensing and mode conversion

Non-adiabatic tapered fibers are basic photonic components used in a wide range of applications. Here we investigate a way to increase their utility through the controllable bending of one of their tapered sections. The experiments carried out explain, for the first time, the mechanics of this approach showing how these tapers can be used to build more sensitive sensors. Their use as highly efficient mode converters is also discussed.     

温度/应变/扭曲三参量同时测量低成本传感系统

提出了一种利用布喇格光纤光栅反射光作信号源、高频CO2激光脉冲写入的长周期光纤光栅和超周期光纤光栅作传感器实现温度、应变和扭曲同时测量的全光栅型低成本强度解调传感方案.文中利用长周期光纤光栅边缘滤波效应实现了温度、应变和扭曲传感信号的实时解调.实验结果表明，其温度和应变的测量灵敏度分别为－0.211 dB/℃和－0.012 dB/10με；而扭曲率的测量灵敏度为0.4394 dB/(rad·m－1)，是该法写入普通LPFG的4倍以上.     

安装偏差对光纤布喇格光栅应变测量的影响

通过理论推导和试验分析研究了安装偏差对光纤应变测量的影响，得到安装误差所带来测量误差的计算公式.发现光纤的轴向与预定安装方向的角偏差越大，测量误差也越大.用光纤光栅进行应变测量时，必须考虑光纤的安装偏差，它直接关系到测量结果的准确性.实际测量中要尽量确保传感器安装方位的准确.     

锥形光纤中光波传输特性的蒙特卡罗模拟

为了分析锥形光纤中光子流的传输特性和空间分布特性，采用了蒙特卡罗算法对其进行了模拟仿真，得到了大量光子经过锥形光纤后的光子分布图.模拟实验结果表明，通过锥形光纤的大量光子集中在探测器中心，到达探测器某一位置的光子数随着该位置到探测器中心距离的增加而减少，并且在锥形光纤锥度比一定的条件下，改变锥形光纤长度，光强度随着长度的增加而下降，但通过锥形光纤的光子分布是一样的.这些研究结果对锥形光纤的设计和实际应用提供了重要依据.     

高速双边缘光纤光栅波长解调技术

提出一种双边缘结构对光纤光栅传感进行波长解调的方案，利用被测光谱通过不同光谱特性的滤波器时输出不同光强的比值确定被测光的波长.该系统在解调时不存在任何机械移动部分，比扫描式的解调方法测量速度更快，运行时更稳定、更精确.     

Fiber torsion sensor demodulated by a high-birefringence fiber Bragg grating

A new high-birefringence (Hi-Bi) fiber torsion sensor demodulated by a Hi-Bi fiber Bragg grating (FBG) is proposed in this study. The twisted Hi-Bi fiber sensor characteristics are analyzed using the Jones matrix. The intensity ratio from two reflected Bragg wavelengths is associated with the twist angle of the measured Hi-Bi fiber. It is found that the twist angle resolution is estimated at around 0.3° under ±0.1 dB readout from an optical spectrum analyzer if the polarization state of the light source is stable. The advantages of this new torsion sensor are: (1) insensitivity to intensity variations from the light source, (2) insensitivity to the torsion gauge length, and (3) absolute measurement in the twist angle. However, the polarization state of light in the proposed method needs to be controlled, and any birefringence change in the twisted Hi-Bi fiber needs to be prevented.     

光突发交换的交换控制策略和光缓存配置

光突发交换是面向下一代互联网的光交换模式.讨论了异步光突发交换系统的交换控制策略以及相应光缓存的优化配置策略.除了传统预约模式的交换策略,还研究了非预约和改进型预约模式,它们的性能评估由计算机仿真给出.结果表明:在条件相当情况下,改进型预约模式具有最低的丢包率.同时光缓存的配置对上述几类交换控制策略的性能都有很大影响,仿真结果指出:光缓存的粒度对系统性能具有重要影响,所讨论的几类交换模式都存在最佳时延粒度,研究结果对光交换矩阵的设计有指导意义.     

高速色散补偿系统中喇曼放大器性能研究

利用喇曼放大器的非线性偏微分耦合方程组,对带喇曼放大器的色散补偿系统进行了仿真,并与传统的仿真方法进行了比较.结果表明:在色散完全补偿系统中,当传输速率较高时,忽略色散后的传统仿真方法的结果,与采用色散补偿技术后使整个系统色散为零的仿真结果有一定偏差,此时不能忽略色散的作用.还对前补偿系统和后补偿系统进行了研究,利用Q值性能判别法,分别得到了信号光脉冲的最佳占空比和最佳脉冲阶数.     

Performance evaluation of fiber Bragg grating sensors by digital holographic technique, strain gauge measurement

In view of the growing interest for non-destructive tests of materials, geodynamical monitoring and in general remote sensing, there is a great effort to bring practical optical sensors from research labs to industrial and environmental applications. In this paper, we employ digital holographic technique as an efficient tool for evaluating the strain measurement capability of fiber Bragg gratings (FBG). A cantilever beam has been employed as a test structure under loading test. The strain measurements results obtained by fiber-based sensors have been compared to those obtained by using full-field digital holographic technique and point-wise strain gauge sensors glued on the same cantilever beam. A simple theoretical model is also presented to interpret and compare the experimental results coming from different techniques.     

A non-fused fiber coupler for side-pumping of double-clad fiber lasers

A non-fused fiber coupler is demonstrated for side-pumping of the double-clad fiber (DCF) lasers by adhesive techniques. The fiber coupler is fabricated by adhering an angularly polished single-clad fiber (SCF) to the inner cladding of the DCF. The pumping light is launched from the SCF by total inner reflection. Coupling coefficient as a function of coupling angle, bend distance, and backward scattering is investigated. The field distribution in DCF is also discussed.